Heat Pipe Solar Collector Black Color
Heat Pipe Solar Collector Black Color
Products Name: Heat Pipe Solar Collector Black Color
Products Model:
Products Detail:
The China Sunwe Solar Collector or Solar Water Heater is a device that absorbs thermal energy from the sun and converts it into usable heat. The heat is normally absorbed by water, or a freeze resistant water mix, which can then be used to supplement hot water heating, space heating and even space cooling via use of an absorption chiller or dessicant cooler technology.
Basic information of Sunwe Solar Collector:
Model number:                C01-Grey
Type:                        China Evacuated vacuum tube solar collector
Pressure:                     Pressurized system
Circulation type:               Closed loop
Installation:                   Both standing & freestanding
Normally tube quantity:          15tubes to 30tubes
Place of Origin:                 Zhejiang, China
Key features of the China Sunwe Solar Collector.
1.       Internationally certified product (EN12975 KEMARY SRCC)
2.       Copper heat pipes for rapid heat transfer and freeze resistant.
3.       Reliable, efficient, tri-element evacuated vacuum tubes
4.       Easy plug-in installation
5.       Maintenance free
6.       Suitable for mains pressure water (up to 6bars, max. 10bars)
7.       Corrosion resistant material (aluminum and copper)
8.       Aluminum frame 2.0mm thickness
9.       Black or Silver aluminum casing in good insulated
10.   Stable solar conversion throughout the day
11.   The best solar collector for domestic solar water heater systems
12.   Ideal for commercial solar water heater applications
13.   Comprehensive 10 years limted warranty (life time will be more than 15years)
The working principle of solar collector is very simple.
1.       Solar Absorption: Solar radiation is absorbed by the evacuated vacuum tubes and converted into heat.
2.       Solar Heat Transfer: Heat pipes conduct the heat from within the solar tube up to header.
3.       Solar Energy Storage: Water or water mix is circulated through the header, via intermittent pump cycling. Each time the water circulates through the header the temperatures is raised by 5-10oC / 9-18oF. Throughout the day, the water in the storage tank is gradually heated.
Sunwe Solar Collector General Specifications
Manifold Casing Material
2.0mm Aluminum Alloy (grade 3A21)
Frame Material
1.8mm Aluminum alloy (grade 3A21)
Header Pipe Material
99.93% pure copper
Compressed Rock Wool
Rubber Seals and Rings
HTV grade silicone rubber
Flat roof installation angle
Maximum Operating Pressure
Optimal flow rate
0.1L/min/tube – 0.026G/min/tube
See EN12975 testing reports
The typical household uses 10,000 to 15,000 BTUs of hot water per person per day. A 20 vacuum tube solar collector can produce 30,000 BTUs on a summer day with a footprint on a roof of only 36 square feet. The system can provide 100% of summer hot water ... 
Contact Us
Tel : +86 573 87872665
Fax : +86 573 87872667
Add : Yuanhua, Haining, Zhejiang, 314416 China . 
Copyright @ 2013 Haining Sunwe New Energy co., Ltd. E-mail: Tel : +86 573 87872665
Supported by :Hangzhou Chuangyi